Hardwired, interconnected smoke and CO alarms

Smoke Detector Installation in Brooklyn

Hardwired, interconnected smoke and carbon monoxide alarms installed by licensed electricians in Brooklyn homes, apartments and rental buildings.

Electrician installing a hardwired smoke detector in a Brooklyn apartment hallway

Kings County Electric provides smoke detector installation in Brooklyn for houses, brownstones, co-ops and rental buildings. We install hardwired smoke alarms with battery backup, combination smoke and carbon monoxide alarms, and interconnected systems where one alarm sounding sets off every alarm in the home.

Working alarms are the simplest life-safety protection a building can have, and in older Brooklyn homes they are often missing, expired or mounted in the wrong place. Whether you are a homeowner replacing chirping units, a landlord preparing for an inspection or a renovator who needs alarms tied into new wiring, we install them correctly and on code. It is part of the residential electrician services we provide across the borough.

Hardwired Alarms

120V alarms with battery backup, wired on a proper circuit.

Interconnected

One alarm sounds, every alarm sounds.

Smoke and CO

Combination units where they make sense.

Landlords and Owners

Units installed and documented for your records.

Electrician upgrading hallway lighting in a Bronx apartment building

Why Hardwired, Interconnected Alarms Matter

A battery-only smoke alarm in a hallway may not wake someone sleeping behind a closed door two floors up, especially in a tall Brooklyn brownstone. Interconnected alarms solve that: when one detects smoke or carbon monoxide, every alarm in the home sounds at once, giving everyone the same head start.

Hardwired alarms run on household power with a battery backup, so they keep working during an outage and do not depend on someone remembering to change batteries. In homes where opening plaster walls for interconnect wiring is not practical, we can install hardwired alarms that interconnect wirelessly, giving you the same whole-home alert with far less disruption.

How We Install Smoke and CO Detectors

A straightforward process that gets the right alarms in the right places.

Walkthrough

We check every floor, sleeping area, the basement and fuel-burning appliances, and note expired or missing alarms.

Placement Plan

We place smoke alarms in and outside sleeping areas and on every level, and CO alarms near sleeping areas, following the code and the manufacturer.

Wiring and Mounting

We run or tap a circuit for hardwired alarms, add interconnection, and mount each alarm away from vents, corners and kitchens that cause false alarms.

Test and Explain

We test every alarm and the interconnection, record install dates, and show you how to test, silence and maintain them.

Smoke and CO Alarm Services

From a single replacement to a whole building, we cover the full range of residential smoke and carbon monoxide protection.

Hardwired Smoke Alarm Installation

New hardwired smoke alarms with battery backup, or direct replacement of old hardwired units that have reached the end of their life. Most smoke alarms should be replaced about ten years after their date of manufacture, which is printed on the back of the unit.

Carbon Monoxide Alarms

Carbon monoxide has no smell and no color. Homes with gas boilers, water heaters, stoves or fireplaces need working CO alarms near sleeping areas.

Ask about CO alarms →

Rental Buildings

In NYC rental buildings, owners are generally responsible for providing and installing smoke and CO alarms. We install them across units and common areas and document the work.

Commercial Life Safety

Fire alarm systems for businesses and larger buildings are a separate specialty.

Commercial services →

Test the Alarm Tonight

Press the test button on every smoke and CO alarm in your home. Silent, chirping or more than ten years old? It is time to replace it.

Kings County Electric installs hardwired and interconnected smoke and carbon monoxide alarms across Brooklyn. Call for a free, upfront quote.

(646) 450-9911

Smoke Detector Installation FAQ

Answers to common questions about smoke and carbon monoxide alarms in Brooklyn homes and buildings. Call (646) 450-9911 for help with yours.

What are the smoke detector requirements in NYC?

NYC requires working smoke alarms in residential units, and new construction and major alterations call for hardwired, interconnected alarms with battery backup. Requirements depend on the building’s type, age and the work being done, so we confirm what applies to your property before we install.

Are carbon monoxide detectors required in New York?

Yes. New York requires carbon monoxide alarms in most homes, particularly those with fuel-burning appliances or an attached garage, and NYC housing rules require them in rental apartments. They should be installed near sleeping areas following the manufacturer’s instructions.

Who is responsible for smoke detectors in a NYC rental apartment?

In multiple dwellings, owners are generally required to provide and install smoke and carbon monoxide alarms, and tenants to keep them in working order and report problems. Landlords can hire us to install alarms throughout a building and keep records of the work.

How long do smoke detectors last?

Most smoke alarms are designed to be replaced about ten years after their date of manufacture. Carbon monoxide alarms often have a shorter service life. Check the date printed on the back of each unit, and replace any alarm that fails its test.

Do battery smoke alarms in New York need sealed batteries?

New York State requires battery-only smoke alarms sold in the state to have a sealed, non-removable battery that lasts ten years. Hardwired alarms use a backup battery, and many models now have a sealed backup too.

Can you interconnect smoke detectors without opening walls?

Often, yes. Hardwired alarms with wireless interconnection let one alarm trigger the others without running new interconnect wire through plaster. Each unit still needs power, and we plan the least disruptive way to get it there.

Why does my smoke detector chirp?

A single chirp every minute or so usually means a low or failing battery, or that the alarm has reached its end of life. Hardwired units can also chirp after a power interruption. If a new battery does not stop it, the alarm likely needs replacing.

Book Your Smoke Detector Installation

Tell us the size of your home or building and what alarms you have now. We will reply with next steps and a free, upfront quote.

(646) 450-9911

Open 24 hours Monday through Saturday. Sunday 8:30 AM to 2 PM. 347 Rogers Ave, Brooklyn, NY 11225.

KCE Free Quote Request