From Victorian Flatbush to Flatbush Avenue

Your Flatbush Electrician

Service upgrades, storm repairs, EV chargers and generators for freestanding Flatbush homes, plus apartment and storefront electrical work.

Electrician installing a weatherproof outlet on the wraparound porch of a Victorian house in Flatbush, Brooklyn

Flatbush is the part of Brooklyn where row houses give way to front lawns. In Prospect Park South, Ditmas Park, Fiske Terrace and the other blocks people call Victorian Flatbush, freestanding wood-frame houses from the early 1900s sit behind deep porches and driveways, many still fed by an overhead service drop from a utility pole. A few minutes away, pre-war elevator buildings line Ocean Avenue, and Flatbush Avenue, Church Avenue and Cortelyou Road carry some of the busiest storefronts in the borough. An electrician in Flatbush has to be ready for all three.

Our licensed crew works out of a shop nearby in Crown Heights. We bring the same thorough walkthrough, written quotes, permits and careful installation to a three-story Victorian that we bring to a studio apartment, and we know the electrical issues these houses tend to share: undersized service, long circuit runs, aging outdoor equipment and wiring that has been extended by every owner since the house was built.

Big-house experience

Three floors, a basement and a detached garage mean long runs. We plan the routes before we drill.

Outside work too

Service masts, porch lights, landscape lighting and garage circuits, not just indoor repairs.

Permits and Con Edison

We file DOB permits and coordinate meter and service changes with the utility.

Close by

Our shop in neighboring Crown Heights keeps Flatbush within easy reach.

Electrician checking a breaker panel by headlamp during a storm power outage in Brooklyn

Storm damage, overhead service and power restoration

Tall street trees are part of what makes Victorian Flatbush beautiful, and they are also why its overhead lines come down in storms. When a limb pulls on the service drop, the damage often lands on the owner’s side of the connection: a bent service mast, a torn weatherhead, or a meter pan pulled away from the siding. Con Edison generally will not restore power until that customer-side equipment has been repaired by a licensed electrician.

That is our job. We make the area safe, repair or replace the mast, weatherhead and meter equipment, file what the city requires and coordinate with Con Edison for reconnection. If the house is still on an old 60 or 100 amp service, the repair is often the right moment for a service upgrade and a new electrical panel instead of a patch. See our emergency electrician service for urgent calls.

Lights out after a storm?

Stay clear of any wire on the ground and report it to Con Edison first.

Then call us about the equipment on your side of the meter: a sagging mast, a meter hanging off the wall, half the house dark while the neighbors have power. We are open 24 hours Monday through Saturday and from 8:30 AM to 2 PM on Sunday.

(646) 450-9911

Electrical upgrades for freestanding Flatbush homes

Houses with yards, driveways and garages can do things a row house cannot. These are the projects Flatbush homeowners ask us about most.

EV charging in the driveway

A Level 2 charger in a detached garage or beside the driveway, on its own dedicated circuit. We confirm that your panel and service can carry the load, run the circuit along the house or underground, and file the permit.

EV charger installation →

Backup generators

Standby units or a portable generator inlet with a proper transfer switch, so the boiler, refrigerator and sump pump keep running when the block goes dark.

Generator installation →

Porch, yard and garage

Porch light fixture installation, motion floodlights, path and landscape lighting, and garage circuits for tools, freezers and door openers. More on lighting installation.

Inside the house

Working in a Flatbush house, step by step

Walk the whole property

Basement to attic, the garage, and the service drop outside. Older Flatbush houses often hide a second subpanel, a double-tapped circuit breaker or an abandoned circuit, and we want to find it before we price anything.

Plan the long runs

We route new cable through basement ceilings, closets and attic space so we open as little plaster and trim as possible, then put the plan and the price in writing.

Permit and coordinate

We file the DOB permit, schedule Con Edison when the service or meter changes, and flag exterior work that needs landmarks review in a historic district.

Test, label and explain

Every circuit is tested and labeled, the inspection is booked, and we walk you through the panel so you know what controls what.

Flatbush electrical questions

What homeowners, co-op residents and shop owners in Flatbush ask us most. Nearby, we also serve Prospect Lefferts Gardens, Crown Heights and every neighborhood on our areas we serve page.

Which parts of Flatbush do you cover?

All of it: Victorian Flatbush and Ditmas Park, East Flatbush, the blocks around Brooklyn College, and the commercial strips on Flatbush Avenue, Church Avenue and Cortelyou Road, including the 11226, 11203 and 11210 ZIP codes in Brooklyn, NY.

My Victorian still has knob-and-tube wiring. Does it have to go?

It is ungrounded, it was never meant to be buried in insulation, and after a century it has usually been spliced into by several owners. Insurers often ask about it too. Wood-frame houses are frequently easier to rewire than masonry row houses because open wall cavities let us fish cable from the basement to the attic. See whole-house rewiring.

Who fixes the wire between the pole and my house?

Con Edison owns the service drop from the pole. The service mast, weatherhead, meter pan and everything inside the house belong to the owner and must be repaired by a licensed electrician. The service conductors carry full voltage even with your main breaker off, so a storm repair is never a DIY job. After storm damage we repair our side and coordinate with Con Edison for theirs.

How big a service do I need for an EV charger or heat pumps?

It depends on everything else in the house, so we start with a load calculation. Many older Flatbush houses we see are on 60 or 100 amp service, and adding a charger, heat pumps or another big appliance often means moving to a larger service. Sometimes a load management device is the cheaper solution, and we will tell you when it does.

Do historic district rules affect electrical work?

Prospect Park South and Ditmas Park are NYC historic districts. Interior work is rarely affected, but new exterior lighting, a relocated meter or equipment mounted on the facade can need a Landmarks Preservation Commission sign-off along with the DOB permit.

Do you work in Flatbush apartment buildings and co-ops?

Yes. For apartments on Ocean Avenue and elsewhere we follow the building alteration agreement, coordinate shutdowns with the super, and handle common-area and code work for owners and boards, including electrical violation removal.

Can you help a business on Flatbush or Church Avenue?

Yes. Store lighting, new circuits for equipment, signage power, troubleshooting and fit-outs for restaurants and retail. See commercial electrician services in Brooklyn.

What does a Flatbush electrician cost?

Every house is different, so we price from a free walkthrough rather than over the phone. You get a written quote with the scope, any permit and the total, and that is the number we work to.

Book a Flatbush electrician

Tell us about the house or the building and what is going wrong. We will call back to schedule a free walkthrough. Homeowners can also see our full residential electrician services.

(646) 450-9911

Open 24 hours Monday through Saturday, and Sunday 8:30 AM to 2 PM.

KCE Free Quote Request