Outlets, switches and GFCI protection
Outlet Installation in Brooklyn
New outlets, GFCI protection, dimmers and smart switches installed safely by licensed Brooklyn electricians, in homes, apartments and storefronts.

Kings County Electric handles outlet installation in Brooklyn for houses, apartments, co-ops and small businesses. We add new outlets where you actually need them, replace worn and ungrounded receptacles, install GFCI and AFCI protection, and upgrade switches to dimmers, smart switches and USB outlets.
Outlets and switches are the parts of your electrical system you touch every day, and in older Brooklyn homes they are often the first thing to fail. A loose, scorched or two-prong outlet is more than an inconvenience: it can signal a bad connection or a missing ground behind the wall. Our licensed electricians fix the cause, not just the faceplate, as part of our full range of residential electrician services.
New Outlets
Added where furniture, desks and appliances really go.
GFCI and AFCI
Shock and arc-fault protection where the code calls for it.
Switches and Dimmers
LED-compatible dimmers, smart and 3-way switches.
Same-Visit Repairs
Loose, warm or dead outlets diagnosed and fixed.
Outlet and Switch Services in Brooklyn
From one dead outlet to a whole apartment of upgrades, here is what we install and repair.
New Outlet Installation
Need an outlet behind the TV, beside the bed, on a kitchen island or in a home office? We run a new circuit or extend an existing one when it has capacity, so you can retire the extension cords and power strips. Kitchen countertops, bathrooms and window air conditioners get the dedicated circuits they need.
GFCI Outlets
Ground-fault outlets shut off power in a fraction of a second when current leaks to ground, protecting you near water in kitchens, bathrooms, laundry areas, basements and outdoors.
Two-Prong to Three-Prong
Old two-prong outlets have no ground. We add a ground where wiring allows, or install GFCI protection as the code-approved option when it does not, and we label it correctly.
Switches and Controls
- Dimmer switches
- Smart and Wi-Fi switches
- 3-way and 4-way switching
- Occupancy sensors
Related Services
Signs an Outlet Needs Attention
Most outlet problems give warning before they become dangerous. A plug that falls out of the outlet, a cover plate that feels warm, a faint buzzing, scorch marks around the slots or a breaker that trips every time you plug in the same appliance are all signs of a loose connection or an overloaded circuit.
Do not ignore them, and do not keep resetting the breaker. Turn the circuit off and call us. We test the outlet and the circuit, tighten or replace failed connections, and tell you if the problem points to something bigger, such as aluminum branch wiring, deteriorated insulation or a panel that needs attention. If a whole section of the house has gone dark, our emergency electricians can help.

Where the Code Calls for GFCI, AFCI and Tamper-Resistant Outlets
Modern electrical codes require extra protection in specific rooms. When we install new outlets or replace old ones, we bring them up to these protections where they apply.
| Protection | What it does | Where it is typically required in homes |
|---|---|---|
| GFCI (ground-fault) | Cuts power when current leaks to ground, preventing shock | Kitchens, bathrooms, laundry areas, basements, garages, outdoors and near sinks |
| AFCI (arc-fault) | Detects dangerous arcing in wiring and cords that can start fires | Bedrooms, living areas, hallways and most other habitable rooms |
| Tamper-resistant | Internal shutters keep children from inserting objects | General 15 and 20 amp outlets throughout a dwelling |
| Weather-resistant | Corrosion-resistant outlet with an in-use cover | Outdoor outlets on porches, decks, yards and rooftops |
Exact requirements depend on the code edition that applies to your job and on whether the work is new or a replacement. We follow the NYC Electrical Code on every installation, and we will explain what applies in your home before we start.
One Visit, Every Outlet Sorted
Make a list of every dead, loose, two-prong or missing outlet in the house and we will handle them in one visit.
Kings County Electric serves homes and businesses across Brooklyn, from Crown Heights and Flatbush to Bed-Stuy and Park Slope. Call for a free, upfront quote.
Outlet Installation FAQ
Answers to common outlet, switch and GFCI questions from Brooklyn homeowners and renters. Call (646) 450-9911 for anything else.
How much does outlet installation cost in Brooklyn?
Replacing an existing outlet or switch is a small job. Adding a new outlet costs more because it depends on where the nearest circuit is, whether that circuit has capacity, and how the wire can be routed through plaster, brick or finished walls. We quote after seeing the space, and the estimate is free.
Can I add an outlet anywhere I want?
Almost anywhere, as long as there is a safe route for the wire and a circuit with room for the load. Countertops, bathrooms and appliances such as microwaves, dishwashers and air conditioners often need their own circuits. We will recommend the best location and circuit when we visit.
Why does my GFCI outlet keep tripping?
A GFCI that trips repeatedly is usually doing its job: it is detecting current leaking to ground from moisture in an outdoor box, a worn appliance cord or a wiring fault downstream. Occasionally the GFCI itself has failed. We test the device and the circuit to find the real cause.
Is it safe to replace a two-prong outlet with a three-prong outlet?
Only if there is a real ground. Installing a three-prong outlet on an ungrounded circuit creates a false sense of safety. The approved fixes are running a ground or installing GFCI protection and labeling the outlet ‘no equipment ground.’ We test and do it the right way.
Do I need an electrician to replace a light switch or outlet?
In New York City, electrical work is meant to be performed by a licensed electrician. Beyond the rules, a licensed electrician checks the box, the connections and the circuit, which is where most outlet problems actually start.
Can you install USB outlets and smart switches?
Yes. We install USB-A and USB-C outlets, smart switches and dimmers, and Wi-Fi controls. Many smart switches need a neutral wire that older Brooklyn switch boxes may not have, and we check that before you buy.
My landlord won’t fix my outlets. What can I do?
In rental apartments, the electrical system is generally the owner’s responsibility. Report the problem to your landlord or managing agent in writing. If you are the owner or manager, we can inspect and correct the outlets and give you documentation for your records.
Book Your Outlet Installation
Tell us how many outlets or switches you need and where. We will reply with next steps and a free, upfront quote.
Open 24 hours Monday through Saturday. Sunday 8:30 AM to 2 PM. 347 Rogers Ave, Brooklyn, NY 11225.