Recessed, fixture, LED and exterior lighting
Lighting Installation in Brooklyn
Recessed lights, fixtures, LED retrofits and exterior lighting designed and installed by licensed Brooklyn electricians.

Kings County Electric handles lighting installation in Brooklyn for brownstones, apartments, condos and storefronts. We install recessed lighting, pendants, chandeliers, sconces, under-cabinet and accent lighting, and exterior lights, and we retrofit tired fixtures to efficient LED with dimmers that actually dim smoothly.
Good lighting changes how a room feels and how much you use it. Brooklyn homes bring their own challenges: tall plaster ceilings, ornate medallions, brick walls, shallow joists and limited attic access. Our electricians plan the layout with you, check the circuit and the box behind every fixture, and leave clean, finished work. Lighting is one of the most requested residential electrician services we provide.
Recessed Lighting
Slim LED downlights, even in plaster ceilings.
Fixtures and Chandeliers
Properly supported boxes for heavy fixtures.
LED Retrofits
Lower bills, better color and less heat.
Exterior Lighting
Stoops, yards, rear decks and building entries.
Lighting Services We Install
Whether you are lighting one room or an entire renovation, we cover the full range of indoor and outdoor lighting.
Recessed Lighting Installation
Canless LED wafer lights are thin enough for most Brooklyn ceilings, including tight joist bays under a floor above. We lay them out for even light without hot spots, choose airtight, insulation-contact rated fixtures where needed, and put each zone on its own dimmer.
Pendants and Chandeliers
Heavy chandeliers and island pendants need a fan- or fixture-rated box anchored to framing. We hang them level, at the right height, and on dimmers.
Kitchen and Bath Lighting
Under-cabinet LED strips, vanity lighting, damp-rated shower lights and task lighting that makes small Brooklyn kitchens work harder.
Controls
- LED-compatible dimmers
- Smart switches and scenes
- Motion and occupancy sensors
- Timers and photocells
Business Lighting

Exterior Lighting for Brooklyn Homes
Outdoor lighting makes a stoop safer, a backyard usable after dark and an entry easier to find. We install wall lanterns beside doors, stoop and step lighting, rear deck and garden lighting, motion-activated security lights and photocell-controlled fixtures that turn on at dusk.
Every exterior fixture we install is rated for wet or damp locations, mounted on a properly sealed box, and fed from a protected circuit. On landmarked blocks and building facades, we work with you or your architect on fixture style and placement before anything goes on the wall.
How a Lighting Installation Comes Together
A clear plan up front means fewer holes in the ceiling and lighting you will actually like.
Walkthrough and Layout
We look at the room, the ceiling and how you use the space, then mark fixture locations and dimmer zones with you.
Circuit and Ceiling Check
We confirm circuit capacity, find the joists and plan wire routes to keep openings small in plaster and finished ceilings.
Installation
We cut, wire and mount fixtures, set boxes for heavy fixtures, and install switches and dimmers matched to the LEDs.
Test and Tune
We test every zone, adjust dimmer trim so lights do not flicker or buzz, clean up, and show you the controls.
LED Lighting Retrofits That Pay Off
Swapping old incandescent, halogen and fluorescent fixtures for LED is one of the easiest ways to cut lighting costs. LEDs use a fraction of the energy, last far longer and run cool, which matters in small Brooklyn apartments in the summer.
The catch is quality. Cheap LEDs can flicker, hum on old dimmers or cast a flat, bluish light. We specify fixtures with good color rendering and a warm color temperature for living spaces, and we replace old dimmers with LED-rated controls so the new lights dim smoothly.
For offices, retail and multifamily common areas, we also handle larger lighting retrofits and controls through our commercial electrical services.
Good reasons to retrofit to LED
- Lower electric bills for the same or better light
- Far less frequent bulb changes on tall ceilings
- Less heat from recessed cans and track lights
- Warm, natural color with high color rendering
- Smooth dimming with LED-rated dimmers
- Fewer fixtures to maintain in hallways and stairwells
Light the Room the Way You Pictured It
Bring us a photo, a fixture you love or just a dark room. We will help you plan the layout and give you a clear price.
Kings County Electric installs lighting across Brooklyn, including Park Slope, Prospect Heights, Crown Heights, Flatbush and Bed-Stuy.
Lighting Installation FAQ
Answers to the lighting questions Brooklyn customers ask us most. Call (646) 450-9911 to talk through your project.
How much does lighting installation cost in Brooklyn?
It depends on the number and type of fixtures, whether new wiring and switches are needed, ceiling height and material, and how much access we have above the ceiling. Hanging a fixture on an existing box is a small job; a room of new recessed lights is a larger one. We give you a free, upfront quote after seeing the space.
Can you install recessed lights in a plaster ceiling?
Yes. Plaster takes more care than drywall, but with careful layout and the right cutting tools we install recessed lights in plaster ceilings regularly. We plan wire routes to keep openings to the fixture holes wherever possible.
How many recessed lights do I need for a room?
It depends on ceiling height, room use and the fixture’s light output and beam spread. As a starting point, many living spaces use fixtures spaced a few feet apart in an even grid, with extra task light over counters. We lay it out for each room instead of using a one-size rule.
Why do my LED lights flicker or buzz?
The most common cause is an old dimmer designed for incandescent bulbs. Mismatched LED drivers, loose connections and too many fixtures on one dimmer can also cause it. We replace the dimmer with an LED-rated model and adjust its low-end trim.
Do I need a permit for lighting installation in NYC?
Electrical work in New York City, including new lighting circuits, should be performed by a licensed electrician, and larger jobs are filed with the Department of Buildings. We tell you what applies to your project and handle any filing.
Can you install a heavy chandelier on a high ceiling?
Yes. We replace standard boxes with fixture-rated boxes anchored to the framing, use the right lifting and support for the weight, and set the hanging height for the room.
Do you install lighting for businesses?
Yes. We install storefront, display, office and exterior sign lighting and handle LED retrofits for commercial spaces through our Brooklyn commercial electricians.
Plan Your Lighting Installation
Tell us the room, the ceiling and the look you want. We will reply with next steps and a free, upfront quote.
Open 24 hours Monday through Saturday. Sunday 8:30 AM to 2 PM. 347 Rogers Ave, Brooklyn, NY 11225.