Level 2 home charging, Brooklyn NY
EV Charger Installation in Brooklyn
Licensed Level 2 charger installs for Brooklyn houses, garages and driveways, with load checks, permits and clean, code-compliant work.

Kings County Electric handles EV charger installation in Brooklyn from the first load check to the final inspection. Our licensed electricians install Level 2 chargers for houses, brownstones with a curb cut, detached garages and small multifamily buildings, and we size every circuit to your panel, your car and the way you actually drive.
Most Brooklyn homes were wired long before anyone parked an electric vehicle out front. Before we mount a charger, we confirm your electrical service can carry a continuous 240-volt load, plan the shortest safe wire route from the panel, and file the electrical permit so the work is on record when you sell, refinance or make an insurance claim. EV charging is one part of our residential electrician services in Brooklyn.
Level 2 Specialists
Hardwired and plug-in 240V chargers for every major EV brand.
Load Calculated
We check your panel and service before we quote.
Permits Handled
Electrical work filed and inspected the right way.
Indoor or Outdoor
Garage, driveway and exterior wall installs, weather-rated.

Can Your Brooklyn Panel Handle an EV Charger?
A Level 2 charger is one of the largest loads a home will ever carry. A typical unit draws 32 to 48 amps for hours at a time, and the electrical code treats EV charging as a continuous load, so the circuit and breaker have to be sized with headroom. On an older 60 or 100 amp service that already runs window air conditioners, an electric range or a dryer, that can push the panel past what it was built for.
We start with a load calculation, not a guess. If your service has room, we add a dedicated 240-volt circuit. If it is tight, we can set the charger to a lower amperage, add a load management device that pauses charging when the house is busy, or recommend a panel or service upgrade. When an upgrade makes sense, our panel team handles it as part of the same project.
How Our EV Charger Installation Works
Four steps, one crew, and no surprises on installation day.
Site Visit and Load Check
We look at your panel, your parking spot and the path between them, then confirm the amperage your service can safely support.
Charger and Circuit Plan
We help you choose a hardwired or plug-in charger, pick the mounting spot, and size the wire, breaker and conduit for the charger you want.
Permit and Installation
We file the electrical work, run the dedicated circuit in conduit or armored cable, mount the charging station and set its amperage to match the breaker.
Testing and Walkthrough
We test the circuit, start a charging session with your car, set up the charger app if it has one, and show you how to schedule off-peak charging.
Level 1, Level 2 and DC Fast Charging Compared
Most Brooklyn drivers who charge at home are best served by a Level 2 charger. Here is how the three charging levels differ.
| Feature | Level 1 | Level 2 | DC Fast Charging |
|---|---|---|---|
| Power | 120V standard outlet | 240V dedicated circuit | High-voltage commercial service |
| Typical added range | About 3 to 5 miles per hour | About 20 to 40 miles per hour, depending on the car | Most of a charge in under an hour |
| Where it fits | Light daily driving or a backup | Homes, garages and driveways | Public charging stations and fleets |
| Installation | Usually none, if the outlet circuit is sound | Licensed electrician, dedicated circuit, permit | Commercial project with utility coordination |
Running a Level 1 cord from a basement outlet through a window is not a long-term plan: older receptacles can overheat under hours of continuous charging. If you plan to charge every night, a properly installed Level 2 circuit is safer and far faster. Businesses and building owners planning several charging stations can talk to our commercial electrician team about multi-port and fleet charging.
Charge at Home, Not at the Curb
Hunting for an open public charger in Brooklyn gets old fast. A home charger means you wake up to a full battery every morning.
Kings County Electric installs EV chargers across Brooklyn, from Crown Heights and Flatbush to Park Slope and Bay Ridge. Call for a free quote and we will tell you what your panel can handle before you buy a charger.
EV Charger Installation FAQ
Straight answers to the questions Brooklyn drivers ask us most. Don’t see yours? Call (646) 450-9911.
How much does EV charger installation in Brooklyn cost?
The price depends on the distance from your panel to the parking spot, whether the wire runs through finished walls or an open basement, the charger’s amperage, and whether your service needs an upgrade. A short run beside the panel is a very different job from a long run to a detached garage. We give you a written, upfront quote after a site visit, and the estimate is free.
Do I need a permit to install an EV charger in NYC?
Yes. Adding a new 240-volt circuit for a charger is electrical work that has to be performed by a licensed electrician and filed with the NYC Department of Buildings. We handle the filing and the inspection, which keeps your insurance and your home sale paperwork clean.
Can you install a charger if I don’t have a driveway or garage?
We need a legal off-street spot that you control, such as a driveway, garage, carport or private lot. Running a cord across the sidewalk to a car parked on the street is not allowed. In multifamily and co-op buildings we can work with the board or managing agent on charging for assigned spaces.
Should I get a hardwired or plug-in charger?
Hardwired chargers allow higher amperage and have no receptacle to wear out, so we usually recommend them for daily use. Plug-in units on a 240-volt receptacle are easier to take with you when you move. Either way, the connection must be rated for continuous EV charging, and outdoor installs need weather-rated equipment and GFCI protection where the code requires it.
Will an EV charger work with my older Brooklyn home’s wiring?
Often yes, with planning. Many brownstones and row houses have 100 amp services or less. We run a load calculation first, then choose between a lower charging amperage, a load management device, or a panel or service upgrade. If the house still has knob-and-tube or cloth-insulated wiring elsewhere, we will point it out so you can plan for whole house rewiring.
Are there rebates or utility programs for home EV chargers?
Con Edison and New York State have offered EV charging programs and off-peak charging incentives, but eligibility and amounts change. Check the current programs before you buy a charger, and we will make sure the installation meets the requirements of any program you apply under.
How long does an EV charger installation take?
A straightforward install near the panel is usually finished in a single visit. Longer wire runs, trenching to a detached garage or a service upgrade add time. We give you a realistic schedule with your quote; permit and inspection timing depends on the city.
Should I add surge protection with my charger?
It is a smart pairing. An EV’s onboard charger is expensive electronics connected to your panel for hours every night. A whole house surge protector at the panel helps shield the charger, the car and the rest of the house from voltage spikes.
Schedule Your EV Charger Installation
Tell us your car, where you park and what panel you have. We will reply with next steps and a free, upfront quote.
Open 24 hours Monday through Saturday. Sunday 8:30 AM to 2 PM. 347 Rogers Ave, Brooklyn, NY 11225.